DIL8 Boost converter design

I threw together a quick boost converter with a DIL layout to use in some of my prototypes. There are a number of small step up converter modules available, but I wanted to design my own. I wanted to use parts that could be sourced from Digikey, or Aliexpress (at lower cost). I also wanted to be able to select the output voltage between 1.8 and 5v. So I threw together this design that uses the TPS61071. Will see how well it works.

The Kicad files and gerbers are in this tarball. I will likely post again once I’ve received and revised the design…