CNC Kit 4 Axis CNC Breakout Board + 4 * TB6600HG Stepper Driver Controller 5A

 
ΔTop

Descriptions

 

DIY CNC Kit  5 Axis Breakout Board
+ 4 Pieces TB6600HG Stepper Driver Board Controller

Descriptions

The latest upgraded salable 5 axis breakout board is specially designed for the CNC single axis stepper driver controller, such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc.

The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver.

Click here for the specification of TB6600HG

In short, with this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence.

Please note: This board use parallel port to communicate with computer, the usb is used for providing power for the board.

Features

I.  5 Axis Breakout Board
  • High performance, cost-effective.
  • Maximum support 5-axis stepper motor driver controller.
  • Two types of ways to get power, 5V DC power supply or USB port to directly get power from PC .
  • Two-stage signal processing, smooth signal transmission, powerful anti-jamming .
  • 5-input interface to define the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc.
  • Relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
  • 5-axis work LED display, visually display the working condition of the stepper driver controller.
  • Parallel port communication

 

II. TB6600HG Stepper Driver Board Controller
  • High performance, cost-effective.
  • Automatic idle-current reduction.
  • Supply voltage up to 45V DC.
  • Output current up to 5.0A.
  • Suitable for 2-phase and 4-phase motors.
  • High speed optoelectronic isolation signal input.
  • Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
  • 1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
  • Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually.
  • Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
  • Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.

Applications

  • Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
  • Suitable for a wide range of stepping motors, from NEMA size 17 to 34(small-sized).
  • For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc..
  • For processing various pattern mould.

Power Supply Selection

  • 12~24V DC power supply for Nema 17 stepper motors.
  • 24~36V DC power supply for Nema 23/24 stepper motors.
  • 36~45V DC power supply for small-sized Nema 34 stepper motors.

Output current of the power supply must exceed the sum of motor rated current.

Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.

TB6600HG DIP-Switch Settings

I. DIP-Switch Instructions
II. DIP-Switch Settings Diagram
Output Current SW1 SW2 SW3
0.2A ON ON ON
0.6A OFF ON ON
1.2A ON OFF ON
1.8A OFF OFF ON
2.5A ON ON OFF
3.3A OFF ON OFF
4.2A ON OFF OFF
5.0A OFF OFF OFF
Microstep Mode SW4 SW5 SW6
N/A ON ON ON
1(Full Step) OFF ON ON
2 ON OFF ON
2 OFF OFF ON
4 ON ON OFF
8 OFF ON OFF
16 ON OFF OFF
N/A OFF OFF OFF

Interface Instructions

(3G 5 Axis Breakout Board)

(TB6600HG Stepper Driver)

Connection Diagrams

(Breakout-Board-Wiring)

(TB6600HG-Wiring)

ΔTop

Descriptions

Electrical Specifications of Breakout board
Input Voltage 5V DC via power adapter or directly get power from PC via USB port
Drive type Pulse + Direction + Enable Signal Control
Suitable Microstep Driver 2 Phase, 3 Phase, 4 Phase Microstep Driver (M542/M542H/MA860H/3MA2290 etc.)
Net weight Approx 80g/300g
Dimensions 90 * 82 * 15mm (L*W*H)
Electrical Specifications Of TB6600HG Stepper Driver
Input Voltage 12V ~ 45V(Peak) DC
Output Current 0.2A ~ 5.0A (Peak)
Drive Type Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper)
Suitable Motor Nema17, Nema23, Nema24, Small-sized Nema34 (Rated current: 0.2A-5.0A)
Net Weight 250g
Dimensions 105*85*35mm
Operationg Environment & Other Specifications Of TB6600HG Stepper Driver
Cooling Natural Cooling or Fan Forced cooling
Operating Environment
Environment Avoid dust, oil fog, corrosive gas
Ambient Temperature 0 °C ~ 50°C (32°F ~ 122°F)
Humidity 40%RH ~ 90%RH
Operating Temperature 70°C (158°F) Max
Storage Temperature -20 °C ~ 65°C (-4°F ~ 149°F)
Total Weight Approx. 300g
ΔTop

Descriptions

4 x 1 Axis TB6600HG Microstep Driver Board (TB1H)
1 x 5 Axis Breakout Board
1 x DB25 LPT Parallel Cable
1 x USB Power Cable
1 x CD Driver
Click here for the Mach3 software
Estimated Delivery Time (subjects to stock availability)
UKRoyal Mail Signed For™ 1st Class2-4 business days
Other Western Europe Countries:Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, SwitzerlandRegistered Airmail service3-7 business days
Other Countries (May depart from other stock location)Registered Airmail service12-21 business days

Please DO CONTACT AND CONFIRM with us BEFORE you bid IF you:

- need the item urgently.

- require that the item should be delivered within a certain time.

- have any other questions/requirements about delivery.

Remarks:

*Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.

*Notification will be sent after your order is dispatched, please check you email or ebay order records for date of dispatch.

*It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.

*Please contact us if you have any trouble in receiving your orders. We will help you to track them.